HS
Huasheng Precision
Dongguan · Est. 2009
Get Quote →
Sheet Metal Fabrication

From Laser Cut Blank to Finished Enclosure in 7 Days.

Full sheet metal line: Mitsubishi 3150EX fiber laser, AMADA 2510 NCT, 600T and 1250T presses, plus TIG / MIG / spot / laser welding. We handle automotive high-strength steels most prototype shops refuse.

  • ▸Laser cutting up to 20 mm mild steel, 12 mm stainless, 8 mm aluminum
  • ▸Bending on EKO and Amada press brakes — ±0.1 mm bend accuracy
  • ▸Welding: TIG, MIG, spot, and fiber laser — weld seams ground smooth on request
  • ▸Specialty: DP780, DP1180, and other automotive high-strength steels
Get Instant Quote →Talk to Engineer
Mitsubishi ML3015eX fiber laser cutter in the sheet metal line
In the shop

Real parts, real machines.

Selected work from our Dongguan floor across recent customer projects.

AMADA CNC turret punch press
AMADA 2510 NCT turret punch — 20 tools, rapid change
Lanshan 1250 ton hydraulic press
Lanshan 1250T press for heavy stamping
DP1180 automotive high-strength-steel battery tray
DP1180 HSS battery tray — our automotive specialty
Sheet metal brackets and clamps
Brackets, clamps, stamped parts on display
Sheet metal electronics enclosures
Electronics enclosures ready for finishing
Appliance control panel
Washing machine front panel, laser + bend + paint
Materials

Materials we machine

All common engineering plastics and metals, including automotive high-strength steels and aerospace-grade aluminums.

SPCC (Cold-rolled steel)
SECC (Electrogalvanized)
SGCC (Hot-dip galvanized)
SPHC (Hot-rolled)
SPTE (Tinplate)
Stainless 304 / 316 / 430
Aluminum 1050 / 1060 / 1070
Aluminum 3003 / 5052
Copper C1100
Brass C7521R
DP780 (automotive HSS)
DP1180 (automotive UHSS)
HC340/590DP+Z
HC550/980DP+Z
DC56D+Z
HC500LAD+Z
See full material list →
Finishing

Surface finishes available

Powder CoatingWet PaintAnodizing (aluminum)Passivation (stainless)Zinc PlatingChrome PlatingSilk ScreenLaser MarkingBrushed Finish
Design

Design guidelines

Follow these rules for optimal cost and lead time. Our engineers flag any DFM issues during quote review.

01
Minimum Bend Radius

Internal bend radius ≥ material thickness for aluminum, ≥1.5× thickness for steel. Tighter radii crack the outer fiber — we'll flag this on DFM review.

02
Hole-to-Edge Distance

Keep holes at least 2× material thickness from any edge or bend. Closer spacing causes deformation during punching or bending.

03
Flange Length

Minimum flange length is 4× material thickness plus bend radius. Shorter flanges cannot be held by the press brake.

04
Countersinks & Hardware

PEM nuts, studs, and standoffs installed in-house. Specify PEM type (CLS, SO, BSO) and orientation in your drawing.

05
Weld Callouts

Use standard weld symbols (AWS A2.4 or ISO 2553). Specify if welds should be ground smooth — default is as-welded.

06
Flat Pattern

Send us 3D + 2D. We'll unfold and verify. If you need a specific K-factor for your sheet source, provide it on the drawing.

How it works

From drawing to part

  1. 01
    Upload STEP + PDF with weld symbols and finish callouts
  2. 02
    DFM review for bend-to-edge, hole spacing, and weld accessibility
  3. 03
    Laser cut blanks on Mitsubishi 3150EX or Bodor fiber laser
  4. 04
    Bend, weld, install hardware, and surface finish
  5. 05
    Inspect, package, and ship with certificate of conformance
Applications

Industries served

Automotive ChassisIndustrial EnclosuresConsumer AppliancesServer / Telecom RacksMedical CabinetsSolar & EV Components
FAQ

Frequently asked questions

Q01Can you cut and form DP1180 or other automotive high-strength steel?+
Yes. We regularly process DP780, DP980, DP1180, HC550/980DP+Z, and similar automotive high-strength steels. Laser cutting parameters and bend radii are adjusted for the material — we'll specify minimum bend radius based on your chosen grade.
Q02What's the bend tolerance on a typical part?+
±0.1 mm on bend dimensions, ±0.5° on bend angle. For tighter requirements, we use coined bends (fixed-angle tooling) and can hold ±0.05 mm, at a higher per-part cost.
Q03Do you do in-house powder coating?+
Yes. Our paint shop includes wet paint, powder coating, silk screen, and UV printing. Standard RAL colors stocked; custom Pantone matches require a small setup fee and 2-day match time.
Q04Can you install PEM hardware?+
Yes. We stock standard CLS, SO, BSO, SS (stainless) PEM nuts, studs, and standoffs. Call out the PEM part number on your drawing and we'll install during fabrication.
Q05What's your MOQ for sheet metal parts?+
No minimum. One-off prototypes, 50-piece pilot runs, and 5,000-piece production orders all go through the same process. Unit cost drops significantly above 50 pieces.
Start a project

Ready for your Sheet Metal Fabrication quote?

Upload a STEP file, get pricing in under 24 hours — including DFM feedback from a real manufacturing engineer.

Get Instant Quote →Talk to an Engineer
Or email [email protected]